• Post author:
  • Post published:
  • Post category:News
  • Post comments:0 Comments

SUPERIOR FLUID SOLUTIONS · CROSS-REFERENCE

Cross-Referencing a Swagelok® Excess Flow Valve

Read the part number, list what has to match by form, fit and function, and send us the lines for a quote.

6000 psigmaximum for the Swagelok® XS series at 100°F, per its catalog; end connections can lower it
XS4 XS6 XS8the three series in the catalog, 1/8 to 1/2 in. and 6 to 12 mm
400°Fmaximum temperature in the same catalog

You have a Swagelok® excess flow valve part number from a drawing, a bill of materials or the tag on an installed unit, and you want to know what to ask for from another source. Our valves hub is where the range starts, but this one is quoted, not shopped: the online store lists no excess flow valves. According to Swagelok®, the manufacturer (catalog MS-01-110, Rev J, October 2021), the valve has a spring-loaded poppet that moves to its tripped position on excess flow downstream, and resets by itself once pressure equalizes through a bleed vent.

FORMBODY AND END STYLE
FITCONNECTION AND SIZE
FUNCTIONTRIP RANGE AND CV
SEALO-RING AND CLEANING

Reading the Swagelok® Excess Flow Valve Number

Swagelok® publishes the XS series as its industrial excess flow valve. In the catalog’s ordering table the numbers run in families: tube-fitting ends read SS-XSS4, SS-XSS6 and SS-XSS8 for 1/4, 3/8 and 1/2 inch; female NPT reads SS-XSF2 through SS-XSF8; male NPT reads SS-XSM2 through SS-XSM8. Mixed ends, ISO, SAE, VCR and VCO connections each have their own numbers. Metric tube ends use numbers such as SS-XSS6MM.

Options are added as suffixes. The catalog lists -BU, -EP, -KZ and -NE for the O-ring material, -PK for a PEEK backup ring, and -SC11 for special cleaning and packaging. Swagelok’s web listing also shows an SS-XSS4-1 with the same two 1/4 inch tube ends as SS-XSS4, and its trip ranges differ across the four listed numbers. The page does not say which suffix means what, so if your number has one, read it as a changed specification and ask the source of the drawing before you quote.

What Must Match: Form, Fit and Function

YOU HOLD
Swagelok® SS-XSS4Swagelok® SS-XSF4
Part numbers as listed on Swagelok’s product pages
WE QUOTE FROM
Superlok® SEFV1 seriesSuperlok® SEFV2 series
Matched by form, fit and function to the lines you send, with the part number confirmed per order

The table sets out what Swagelok® publishes for the XS series and what we need from you in each row.

Matching checklist for an excess flow valveLeft column from Swagelok’s catalog and product pages
Point What Swagelok® publishes Send us
Form 316 stainless steel inlet and outlet bodies and poppet, 302 stainless steel spring Body material and grade
Fit Tube, pipe or face seal ends, 1/8 to 1/2 in. and 6 to 12 mm; ratings vary by end End type and size at both ports
Function Spring trip range and Cv by series; air and water flow tables at 70°F Normal flow, and the flow at which the line should shut
Seal FKM O-ring as standard; four other O-ring materials by suffix O-ring material, medium and temperature
Cleaning Standard cleaning, or special cleaning by suffix Cleaning level, and any oxygen service

Swagelok® states that the designer and user are responsible for function, material compatibility, ratings and installation.

Fit needs the most care. The catalog gives 6000 psig at 100°F for tube-fitting ends, but lists lower figures for some other connections, including 4900 psig for 1/2 inch female NPT and 4300 psig for 1/2 inch male VCR. Swagelok® also publishes a warning not to mix its two-ferrule tube-fitting end components with those of other manufacturers. If your valve has tube ends, tell us whether you are changing the valve alone or the whole joint, and see our cross-reference for instrumentation fittings for the fitting side.

Function is the point of the part. The valve is meant to close when flow downstream exceeds its trip range. The product page for SS-XSS4 lists a spring trip range of 3.9 to 5.8 U.S. gal/min and a Cv maximum of 0.5. Read the medium and temperature the figure was taken at, and do not size the replacement to your normal flow alone. The catalog also notes that the standard bleed vent passes under 1 percent of trip-range flow, and that medium and low flow spring options may exceed that. Ask for the bleed behaviour of any valve we quote.

Ordering Against a Swagelok® Excess Flow Valve Number

Superlok® publishes its own industrial excess flow valves in two series, SEFV1 and SEFV2, with 316 stainless steel bodies, a 6000 psig rating at 100°F and automatic reset through a bleed vent, according to its datasheet, a manufacturer publication. We use that datasheet to build the quote from your lines. We do not name a one-to-one substitute for a Swagelok® number, and the datasheet figures are the start of the comparison, not the end of it. Superlok® describes its tube fittings as having the finest interior surface finish of any tube and pipe fitting on the market, and a valve quote can include the fittings for the same run, listed in 316 stainless steel and confirmed per order.

For a corrosion-resistant build, say which wetted parts matter: body, poppet, spring and O-ring. Ask for material test reports if the line is regulated or audited. If the valve sits beside a pressure-protection device, relief valves and an excess flow valve do different jobs: one limits pressure, the other limits flow.

If this swap is part of a shutdown, plan the quote early. Our refinery turnaround and turnaround planning posts cover scheduling, and our note on stainless steel prices gives background on how that material is priced.

Buyer Questions on Excess Flow Cross-References

Can you give me the Superlok® number for my Swagelok® part?

We do not name a one-to-one substitute. Send the part number and the lines in the table, and we compare form, fit and function and confirm the number per order.

Why is there no add-to-cart for excess flow valves?

The online shop lists none, so each request is quoted. The request form takes the details above.

Does the trip range depend on what flows through it?

Swagelok® publishes separate air and water flow data at 70°F, so the medium matters. Give us yours.

My number ends in a suffix. Does it change the quote?

Yes. The catalog uses suffixes for O-ring material, backup ring and cleaning, so tell us the full number as printed.

Send the part number and the lines

End connections, size, medium, temperature and trip flow are enough to begin.

Request a Quote →

SUPERIOR FLUID SOLUTIONS

Part numbers read closely, lines matched openly.

Sources

  1. Swagelok® Company, “Industrial Excess Flow Valves, XS Series,” MS-01-110 Rev J, October 2021 (manufacturer publication). Supports the operation, materials, ratings, end-connection ordering numbers, suffix options, bleed-vent statement, flow tables and design responsibility note. swagelok.com
  2. Swagelok® Company, Excess Flow Valves, Fixed Pressure, and part SS-XSS4 product pages (manufacturer publication). Support the listed part numbers, trip range and Cv figures, and the warning on mixing tube-fitting end components. products.swagelok.com, SS-XSS4
  3. Superlok North America, industrial excess flow valves datasheet and catalog page (manufacturer publication). Support the SEFV1 and SEFV2 series, 316 stainless steel body, 6000 psig at 100°F and automatic reset. datasheet, catalog page
  4. Superior Fluid Solutions, valves hub (distributor publication). Supports the quote route; the hub lists no excess flow valve category. valves

Technical note: The sources establish what Swagelok® and Superlok® each publish about their excess flow valves: operation, materials, ratings, ordering numbers and options. They do not establish what the -1 suffix on SS-XSS4-1 means, the flow medium behind the product page’s trip range units, how any Superlok® part compares with a Swagelok® part in service, or any lead time or stock. Both catalogs state ratings with specified O-rings and at stated temperatures. Grade and rating are confirmed per order.

Trademark disclaimer: Swagelok® is a registered mark of Swagelok® Company. Superlok® is a registered mark of its owner. Swagelok® part numbers are cited only to identify the part you hold. Cross-references are made by form, fit, and function only.

Leave a Reply